A 50-Kn load is supported by a tie rod and a pipe column as shown in Figure. Tie rod AB is made of aluminum alloy 2024-T4 (see attached appendix B for properties), has a cross-sectional area of 650. We also include our exclusive Roll Stop tie rod end boots to prevent tie rod roll and keep your steering tight. BUDGET 1-TON KITS. For those who are looking to save some money we now offer our budget 1-Ton kits. These kits use the exact same 7075 aluminum links, but with more inexpensive tie rod.
TRW SERIESAllLift Cranes® Overbraced Tie Rod Wall Mounted Jib Crane provides hoist coverage and 180 degree of rotation. This jib has 2 brackets that mount to a wall or building beam. The bottom bracket has a boom that is perpendicular to the wall with a bracket toward the end that a tie rod is attached to. This is the least expensive jib, but it takes up the most head room and it exerts the most force on whatever it's mounted to.
Application
For individual use in bays, along walls, or columns of plants, or as a supplement to an overhead crane or monorail system. The Overbraced Tie Rod is perfect for any situation where floor room just isn't available.
Also available is our 1/2 – 1 Ton Overbraced Tie Rod Wall Mounts
Note: Vertical mounting beam not included
| CAPACITY LBS | MODEL # | SPAN | BRACKET CENTERS | BEAM HEIGHT | FLANGE WIDTH | THRUST & PULL | UNIT WEIGHT |
| 4,000 | TRW408 | 8′ | 2′-9″ | 8″ | 5 ¼' | 14,875 # | 321 # |
| 4,000 | TRW410 | 10′ | 3′-0″ | 8″ | 5 ¼' | 17,250 # | 372 # |
| 4,000 | TRW412 | 12′ | 3′-9″ | 8″ | 5 ¼' | 16,282 # | 418 # |
| 4,000 | TRW414 | 14′ | 4′-6″ | 8″ | 5 ¼' | 15,875 # | 471 # |
| 4,000 | TRW416 | 16′ | 5′-6″ | 12″ | 6 ½' | 14,975 # | 683 # |
| 4,000 | TRW418 | 18′ | 6′-0″ | 12″ | 6 ½' | 15,585 # | 752 # |
| 4,000 | TRW420 | 20′ | 6′-6″ | 12″ | 6 ½' | 16,150 # | 820 # |
| 4,000 | TRW422 | 22′ | 7′-0″ | 12″ | 6 ½' | 18,415 # | 1,535 # |
| 4,000 | TRW424 | 24′ | 7′-6″ | 12″ | 6 ½' | 18,910 # | 1,675 # |
| 4,000 | TRW426 | 26′ | 8′-0″ | 12″ | 6 ½' | 19,420 # | 1,814 # |
| 4,000 | TRW428 | 28′ | 9′-0″ | 12″ | 6 ½' | 18,880 # | 1,957 # |
| 4,000 | TRW430 | 30′ | 10′-0″ | 12″ | 6 ½' | 18,200 # | 2,097 # |
| CAPACITY LBS | MODEL # | SPAN | BRACKET CENTERS | BEAM HEIGHT | FLANGE WIDTH | THRUST & PULL | UNIT WEIGHT |
| 6,000 | TRW608 | 8′ | 2′-9″ | 8″ | 5 ¼' | 22,170 # | 339 # |
| 6,000 | TRW610 | 10′ | 3′-3″ | 8″ | 5 ¼' | 23,275 # | 393 # |
| 6,000 | TRW612 | 12′ | 4′-0″ | 12″ | 6 ½' | 22,750 # | 561 # |
| 6,000 | TRW614 | 14′ | 4′-9″ | 12″ | 6 ½' | 22,350 # | 636 # |
| 6,000 | TRW616 | 16′ | 5′-6″ | 12″ | 6 ½' | 21,975 # | 708 # |
| 6,000 | TRW618 | 18′ | 6′-3″ | 16″ | 7″ | 22,375 # | 967 # |
| 6,000 | TRW620 | 20′ | 7′-0″ | 16″ | 7″ | 22,455 # | 1,059 # |
Notes:
- Mounting bolts not included-use grade 5 or better provided by installer
- All weights are estimated & dimensions are subject to change
ADDITIONAL OPTIONS
The Tie Rod Ab Exerts The 250 Mph
A 50-Kn load is supported by a tie rod and a pipe column as shown in Figure. Tie rod AB is made of aluminum alloy 2024-T4 (see attached appendix B for properties), has a cross-sectional area of 650. We also include our exclusive Roll Stop tie rod end boots to prevent tie rod roll and keep your steering tight. BUDGET 1-TON KITS. For those who are looking to save some money we now offer our budget 1-Ton kits. These kits use the exact same 7075 aluminum links, but with more inexpensive tie rod.
TRW SERIESAllLift Cranes® Overbraced Tie Rod Wall Mounted Jib Crane provides hoist coverage and 180 degree of rotation. This jib has 2 brackets that mount to a wall or building beam. The bottom bracket has a boom that is perpendicular to the wall with a bracket toward the end that a tie rod is attached to. This is the least expensive jib, but it takes up the most head room and it exerts the most force on whatever it's mounted to.
Application
For individual use in bays, along walls, or columns of plants, or as a supplement to an overhead crane or monorail system. The Overbraced Tie Rod is perfect for any situation where floor room just isn't available.
Also available is our 1/2 – 1 Ton Overbraced Tie Rod Wall Mounts
Note: Vertical mounting beam not included
| CAPACITY LBS | MODEL # | SPAN | BRACKET CENTERS | BEAM HEIGHT | FLANGE WIDTH | THRUST & PULL | UNIT WEIGHT |
| 4,000 | TRW408 | 8′ | 2′-9″ | 8″ | 5 ¼' | 14,875 # | 321 # |
| 4,000 | TRW410 | 10′ | 3′-0″ | 8″ | 5 ¼' | 17,250 # | 372 # |
| 4,000 | TRW412 | 12′ | 3′-9″ | 8″ | 5 ¼' | 16,282 # | 418 # |
| 4,000 | TRW414 | 14′ | 4′-6″ | 8″ | 5 ¼' | 15,875 # | 471 # |
| 4,000 | TRW416 | 16′ | 5′-6″ | 12″ | 6 ½' | 14,975 # | 683 # |
| 4,000 | TRW418 | 18′ | 6′-0″ | 12″ | 6 ½' | 15,585 # | 752 # |
| 4,000 | TRW420 | 20′ | 6′-6″ | 12″ | 6 ½' | 16,150 # | 820 # |
| 4,000 | TRW422 | 22′ | 7′-0″ | 12″ | 6 ½' | 18,415 # | 1,535 # |
| 4,000 | TRW424 | 24′ | 7′-6″ | 12″ | 6 ½' | 18,910 # | 1,675 # |
| 4,000 | TRW426 | 26′ | 8′-0″ | 12″ | 6 ½' | 19,420 # | 1,814 # |
| 4,000 | TRW428 | 28′ | 9′-0″ | 12″ | 6 ½' | 18,880 # | 1,957 # |
| 4,000 | TRW430 | 30′ | 10′-0″ | 12″ | 6 ½' | 18,200 # | 2,097 # |
| CAPACITY LBS | MODEL # | SPAN | BRACKET CENTERS | BEAM HEIGHT | FLANGE WIDTH | THRUST & PULL | UNIT WEIGHT |
| 6,000 | TRW608 | 8′ | 2′-9″ | 8″ | 5 ¼' | 22,170 # | 339 # |
| 6,000 | TRW610 | 10′ | 3′-3″ | 8″ | 5 ¼' | 23,275 # | 393 # |
| 6,000 | TRW612 | 12′ | 4′-0″ | 12″ | 6 ½' | 22,750 # | 561 # |
| 6,000 | TRW614 | 14′ | 4′-9″ | 12″ | 6 ½' | 22,350 # | 636 # |
| 6,000 | TRW616 | 16′ | 5′-6″ | 12″ | 6 ½' | 21,975 # | 708 # |
| 6,000 | TRW618 | 18′ | 6′-3″ | 16″ | 7″ | 22,375 # | 967 # |
| 6,000 | TRW620 | 20′ | 7′-0″ | 16″ | 7″ | 22,455 # | 1,059 # |
Notes:
- Mounting bolts not included-use grade 5 or better provided by installer
- All weights are estimated & dimensions are subject to change
ADDITIONAL OPTIONS
The Tie Rod Ab Exerts The 250 Mph
- TAG LINE KITS
- ROTATION BUMPERS
- HOISTS & TROLLEYS
DEFINITION OF TERMS:
The Tie Rod Ab Exerts The 250 000
- Span (from center of hinge pin to the end of the beam)
- Thrust & Pull – The forces exerted by a crane on its supporting structure. Thrust is the pushing force, while pull is the tensile force. Maximum thrust & pull occurs when the crane is loaded to capacity
The Tie-rod Ab Exerts The 250
[/su_column]