Brother Mfc 6490cw Unable To Print 36

BROTHER MFC-6490CW MANUAL PDF

The message 'Print Unable 36' will appear on the display if there is a mechanical malfunction of the Brother machine. To reset the machine, power the machine Off using the power switch located on the right side of the machine. Wait approximately 10 seconds and then power it back On. SOFTWARE USER'S GUIDE For DCP users; This documentation is for both MFC and DCP models. Where it says 'MFC' in this user's guide, please read 'MFC' as 'DCP'.

November 27, 2020 | by admin

Under the supervision of Brother Industries Ltd., this manual has been . remedy against Brother for any failure of the MFC/Fax machine to. View and Download Brother MFCCW quick setup manual online. Brother MFCCW: Quick Start. MFCCW All in One Printer pdf manual. Start here, Important • Read online or download PDF • Brother MFCCW User Manual.

User's Guide

If the language screen appears, choose your language. Connect the power cord. Page 36 If the model name screen appears, choose your machine.

Press a or b mfx-6490cw choose LCD Settings.

Brother MFC-6490CW User Manual

The Whiteboard Enhancer software cleans up and enhances text and images from photos taken of your whiteboard. Page 19 Please wait, it btother take a few seconds for the software to install. Page 38 If you encounter this failure, please go to step 16 on page 31 and setup the wireless connection again.

Connect the telephone line cord. Page 7 Check the print quality Important Make sure you put paper in the upper tray for the initial setup. Slowly push the paper tray completely into the machine. If you have Pulse dialing service rotaryyou need to change the dialing mode. Windows Vista If the model name screen appears, choose your machine.

Press a or b to choose LCD Contrast. Make sure that the power is turned on.

BROTHER MFCCW QUICK SETUP MANUAL Pdf Download.

Comments to this Manuals Your Name. You need to purchase the correct interface cable for the interface you want to use for USB or network.

By pressing ‘print' button you mamual print only current page. For more information, see Entering Text for Wireless Settings on page Don't have an account? If you have Voice Mail on the same telephone line as your Brother machine, there is a strong possibility that Voice Mail mfcc-6490cw the Brother brorher will conflict with each other when receiving incoming calls. Replacement Consumables The contents of this manual and the specifications of this product are subject to change without notice.

Page 26 Mac OS X Connect one end of the telephone line cord to the jack on the machine marked LINE and the other end to a modular wall jack. If you encounter this failure, please go to step 16 on page 31 and setup the wireless connection again. Both methods are for infrastructure mode, mmanual a wireless router or access point that uses DHCP to assign IP addresses. Navratri puja vidhi. Press OK when you have entered all the characters, then press 1 for Yes to apply your settings.

Note When you use Legal, A3 or Ledger size paper, press and hold the universal guide release button as you slide out the front of paper tray 1. If the model name screen appears, choose your machine.

Remove the protective tape and film covering the scanner glass. Page 10 Set your station ID You should store your name and fax number to be printed on all fax pages that you send. The Configure IP Address window will appear. Connect The Power Cord After restarting the computer, you must be logged on with Administrator rights.

Please make sure you use a USB 2. Manua show me this message again. The Brother software will search for the Brother device. Press a or b to choose Initial Setup.

This manual also for:

If one of the following messages is displayed on the LCD, the machine may have a mechanical problem, a dirty encoder strip or a foreign object such as a clip or ripped paper inside the machine.

• Unable to Clean (Clean Unable)
• Unable to Init. (Init Unable)
• Unable to Print (Print Unable)
• Unable to Scan (Scan Unable)

To solve the problem please follow the steps below:

If the following solutions do not solve the problem, your machine require repair. Please contact Brother Customer Service from 'Contact Us'.

NOTE: The images shown below are from the representative product. Your model may look different from the picture. Trunk muzik mp3 song.

Brother Mfc 6490cw Unable To Print 36 Inches

1. Disconnect the machine from the power Outlet.
2. Lift the scanner cover using the plastic tabs or finger holds, located on the left and right side of the machine until it locks securely into the open position.
   
   

   DO NOT touch the encoder strip. The encoder strip is a clear plastic strip in front of the white vinyl band (surrounded in red shown in the picture below). If the encoder gets markings or debris on its surface, it may cause other problems.

   
   
   
   
3. Look inside the machine for jammed paper or foreign objects and remove. The paper may be jammed under the print head. If the print head is in the middle, use your fingers to slide the print head to right or left side and check for paper scraps underneath the print head.
   - If the print head is on the left side, go to the steps of 'If the print head is on the left side'.

   - If the print head is on the right side, go to the steps of 'If the print head is on the right side'.

[If the print head is on the left side]

1. Move the print head to the middle using your fingers.
   * DO NOT touch the encoder strip (marked in red shown below).
   
2. After moving the print head check to see if there is ripped paper or a foreign object in the left corner and remove.
   

   The ripped paper may be very small. Using a flashlight will help you to find the ripped paper.

   
   
3. Close the scanner cover and connect the machine back into the power outlet.
   

   Be careful not to trap your fingers under the scanner cover. Always use the finger holds provided on both sides of the scanner cover when opening and closing it.

If the error message continues, or if no debris was found, the encoder strip will need to be cleaned.
Go to step B to clean the encoder strip.

Mfc 6490cw Brother

[If the print head is on the right side (The print head is hidden at the right corner)]
(The picture shown below is an example when the print head is hidden at the right corner.)

1. Connect the power cord back into the power outlet. The LCD shows 'Cover is Open'.
2. Press STOP/EXIT for approximately 5 seconds until the print head moves to the middle.
3. Disconnect the machine from the power outlet.
   

   Make sure to disconnect the machine. The print head may move and injure your hand.

4. See if there is ripped paper or any foreign objects in the right corner and remove.
   Tweezers may be used with caution to remove paper scrap or the foreign object.
   

   The ripped paper may be very small. Using a flashlight will help you to find the ripped paper.

   
   
5. Close the scanner cover and connect the machine back into the power outlet.
   

   Be careful not to trap your fingers under the scanner cover. Ufst box crack download. Always use the finger holds provided on both sides of the scanner cover when opening and closing it.

   
   

If the error message continues, or if no debris was found, the encoder strip will need to be cleaned.
Go to step B to clean the encoder strip.

Page 26 Mac OS X Connect one end of the telephone line cord to the jack on the machine marked LINE and the other end to a modular wall jack. If you encounter this failure, please go to step 16 on page 31 and setup the wireless connection again. Both methods are for infrastructure mode, mmanual a wireless router or access point that uses DHCP to assign IP addresses. Navratri puja vidhi. Press OK when you have entered all the characters, then press 1 for Yes to apply your settings.

Note When you use Legal, A3 or Ledger size paper, press and hold the universal guide release button as you slide out the front of paper tray 1. If the model name screen appears, choose your machine.

Remove the protective tape and film covering the scanner glass. Page 10 Set your station ID You should store your name and fax number to be printed on all fax pages that you send. The Configure IP Address window will appear. Connect The Power Cord After restarting the computer, you must be logged on with Administrator rights.

Please make sure you use a USB 2. Manua show me this message again. The Brother software will search for the Brother device. Press a or b to choose Initial Setup.

This manual also for:

If one of the following messages is displayed on the LCD, the machine may have a mechanical problem, a dirty encoder strip or a foreign object such as a clip or ripped paper inside the machine.

• Unable to Clean (Clean Unable)
• Unable to Init. (Init Unable)
• Unable to Print (Print Unable)
• Unable to Scan (Scan Unable)

To solve the problem please follow the steps below:

If the following solutions do not solve the problem, your machine require repair. Please contact Brother Customer Service from 'Contact Us'.

NOTE: The images shown below are from the representative product. Your model may look different from the picture. Trunk muzik mp3 song.

Brother Mfc 6490cw Unable To Print 36 Inches

1. Disconnect the machine from the power Outlet.
2. Lift the scanner cover using the plastic tabs or finger holds, located on the left and right side of the machine until it locks securely into the open position.
   
   

   DO NOT touch the encoder strip. The encoder strip is a clear plastic strip in front of the white vinyl band (surrounded in red shown in the picture below). If the encoder gets markings or debris on its surface, it may cause other problems.

   
   
   
   
3. Look inside the machine for jammed paper or foreign objects and remove. The paper may be jammed under the print head. If the print head is in the middle, use your fingers to slide the print head to right or left side and check for paper scraps underneath the print head.
   - If the print head is on the left side, go to the steps of 'If the print head is on the left side'.

   - If the print head is on the right side, go to the steps of 'If the print head is on the right side'.

[If the print head is on the left side]

1. Move the print head to the middle using your fingers.
   * DO NOT touch the encoder strip (marked in red shown below).
   
2. After moving the print head check to see if there is ripped paper or a foreign object in the left corner and remove.
   

   The ripped paper may be very small. Using a flashlight will help you to find the ripped paper.

   
   
3. Close the scanner cover and connect the machine back into the power outlet.
   

   Be careful not to trap your fingers under the scanner cover. Always use the finger holds provided on both sides of the scanner cover when opening and closing it.

If the error message continues, or if no debris was found, the encoder strip will need to be cleaned.
Go to step B to clean the encoder strip.

Mfc 6490cw Brother

[If the print head is on the right side (The print head is hidden at the right corner)]
(The picture shown below is an example when the print head is hidden at the right corner.)

1. Connect the power cord back into the power outlet. The LCD shows 'Cover is Open'.
2. Press STOP/EXIT for approximately 5 seconds until the print head moves to the middle.
3. Disconnect the machine from the power outlet.
   

   Make sure to disconnect the machine. The print head may move and injure your hand.

4. See if there is ripped paper or any foreign objects in the right corner and remove.
   Tweezers may be used with caution to remove paper scrap or the foreign object.
   

   The ripped paper may be very small. Using a flashlight will help you to find the ripped paper.

   
   
5. Close the scanner cover and connect the machine back into the power outlet.
   

   Be careful not to trap your fingers under the scanner cover. Ufst box crack download. Always use the finger holds provided on both sides of the scanner cover when opening and closing it.

   
   

If the error message continues, or if no debris was found, the encoder strip will need to be cleaned.
Go to step B to clean the encoder strip.

Markings and debris can adhere on the surface of the encoder strip from the reasons listed below

• Touching the encoder strip with your hands can place smudge marks on the encoder strip.
• The removal of jammed paper can cause grease to get applied to the surface of the encoder strip.

To solve this problem clean the encoder strip following the steps listed below:

DO NOT use flammable substances or any type of spray to clean the inside or outside of the machine.
Doing this may cause a fire or electrical shock.

1. Disconnect the machine from the power outlet.
2. Lift the scanner cover using the plastic tabs or finger holds, located on the left and right side of the machine until it locks securely into the open position.
3. Locate the Encoder Strip.
   The encoder strip is a clear plastic strip in front of the white vinyl band.
   (surrounded in red shown in the picture below)
   
   
4. Clean both sides of the encoder strip with a dry lint free cloth.
   
   • Do NOT use any type of paper products. Use only a dry lint free cloth.
   • The encoder strip will have some slack to allow you to move around slightly to assist with cleaning.
   • Do NOT pull on the strip with force. Too much force may damage the machine.
   • Do not touch encoder strip with bare hands.
   • Do NOT scrub hard the encoder strip. Doing this may cause scratches on its surface.
   
   
   
   
5. Clean encoder strip from right to left. Make sure to stop just before the left corner.
   
6. Clean encoder strip from left to right. Make sure to stop just before the right corner.
   
   
7. Repeat steps 5 and 6 2 or 3 times to clean thoroughly.
8. After cleaning the encoder strip, close the scanner cover.
9. Connect the machine back into the power outlet.

Brother Mfc 6490cw Troubleshooting

If the problem still continues, your machine require repair. Please contact Brother Customer Service from 'Contact Us'.